Acronis true image echo マニュアル
113 Copyright © Acronis, Inc., 2000-2009
contents with the
/list/filename
command an use the number
from the Idx column.
/letter
Assigns letters to the mounted drives. This option is used with
/partition
option only.
Unplug
/letter:X
Specifies the virtual drive to be disconnected by letter.
/letter:all
Disconnects all virtual drives.
asz_create
/password:[password]
Sets a password for the Acronis Secure Zone.
/harddisk:X
Specifies the hard disk number where the Acronis Secure Zone will
be created.
/size:[ASZ size in sectors
| unallocated]
| unallocated]
Sets the Acronis Secure Zone size (in sectors).
If not specified, the size is set as an average between the maximal
(unallocated space plus free space on all partitions selected with the
If not specified, the size is set as an average between the maximal
(unallocated space plus free space on all partitions selected with the
/partition
option) and minimal (about 35MB) values.
Either way, the program will first use the unallocated space. If there
is not enough unallocated space, the selected partitions will be
decreased. Resizing of locked partitions requires a reboot.
With “unallocated”, the zone will use all unallocated space on the
With “unallocated”, the zone will use all unallocated space on the
disk. Partitions will be moved, if necessary, but not resized. Moving
of locked partitions requires a reboot. The
of locked partitions requires a reboot. The
/partition
option is
ignored.
/asz_activate
Activates the Acronis Startup Recovery Manager. The option will not
take effect if the system partition is resized during Acronis Secure
Zone creation. In that case, use the separate
Zone creation. In that case, use the separate
/asz_activate
command.
asz_activate
/password:[password]
Specifies a password for the Acronis Secure Zone.
asz_delete
/partition:[partition
number]
number]
Specifies partitions to which free space will be added after the
Acronis Secure Zone is deleted. If you specify several partitions, the
space will be distributed proportionally to each partition’s size.
clone
/harddisk:[disk number]
Specifies a source hard disk which will be cloned to the new hard
disk.
disk.
/target_harddisk:[disk
number]
number]
Specifies the target hard disk number where the source hard disk
will be cloned.
15.1.4 Trueimagecmd.exe usage examples
1. Image disks and partitions
trueimagecmd /create /filename:"C:\Test\1.tib" /partition:2-
1,1-3
1,1-3