Alcatel-Lucent ap70 ユーザーズマニュアル
OmniAccess OAW-AP70: Installation Guide
10
Part 031644-00
May 2005
AP Provisioning
AP Provisioning is useful for brand new APs with default configurations. To
perform AP Provisioning from the GUI:
perform AP Provisioning from the GUI:
1. Go to
Maintenance > Program AP
.
On this window, there are two tabs:
Provision
and
Reprovision
. The
Provisioning tab is selected by default.
F
IGURE
2-1 Provisioning Tab
2
Configure the APs Subnet and Netmask.
This is the subnet from which the AP gets an IP during provisioning. (This is not
the IP address the AP will use when deployed.)
the IP address the AP will use when deployed.)
3
Select the Port or Port range for provisioning.
To set the Port Range, select the first and the last ports of your range. All the
ports in between are automatically selected. (Ports have to be sequentially
assigned.)
ports in between are automatically selected. (Ports have to be sequentially
assigned.)
4
Enter the required information and click
Enable
.The Port Range screen
displays.