Alcatel-Lucent omniacces-voip gateway ユーザーズマニュアル
VoIP Commands
Page 5-218
Command Usage
Set gatekeeper mode for voice switching daughtercard gateway discovery (manual/auto).
Syntax Options
Remarks
This command is used to control gatekeeper operations in conjunction with the
voice network
card h.323 gatekeeper control
command. Internally, the setting affects two different variables in
the switch configuration. These include the gatekeeper configuration field which controls the
enable/disable operation of the gatekeeper, and the auto discovery gatekeeper configuration
field (when enabled), which determines automatic or manual discovery.
enable/disable operation of the gatekeeper, and the auto discovery gatekeeper configuration
field (when enabled), which determines automatic or manual discovery.
voice network h.323 gatekeeper mode
voice network card <
slot/card_number
> h.323 gatekeeper mode {manual | auto}
Definitions:
slot
slot
Specifies the chassis slot number where VSM is installed, (e.g.,
2
).
card_number
Specifies the voice daughtercard position number, (e.g.,
1
).
manual
Turns ON H.323 gatekeeper manual discovery mode for specified voice network.
auto
Turns ON H.323 gatekeeper autodiscovery mode for specified voice network.
♦ Syntax Note ♦
To use this command, the
voice network card h.323 gatekeeper
control
command must be turned ON.
Default:
The default setting is
The default setting is
manual
.
Command Example:
voice network card 2/1 h.323 gatekeeper mode manual
voice network card 2/2 h.323 gatekeeper mode auto
voice network card 2/2 h.323 gatekeeper mode auto