Alcatel-Lucent omniaccess 4308 ユーザーズマニュアル

C

HAPTER

 3

Once the Alcatel Wireless LAN Switch is physically installed, run 
the following power-on test:

Check for the proper power indicators.

Immediately upon power up, you should observe the following:

z

The system Power LED lights solid green

z

The system Status LED is initially off while booting

Check the fans to verify they are working.

You should be able to feel significant airflow blowing from the 
chassis vents at each of the three fan positions.

Check for the appropriate operation indicators.

Once the system has successfully booted, you should observe 
the following:

z

The system Power LED is still lit solid green.

z

The system Status LED is solid green.

—For more information on LED behavior, see 

Once the system has passed the initial power-up test:

z

Connect appropriate network cables (see 

 for port and cable information).

—If one or more fans do not work, immediately shut down 

and replace the Alcatel Wireless LAN Switch.