AMX design xpress home theater v1.3 ユーザーガイド
Introduction
7
DXP-HT v1.3 - Programmer’s Guide
MAX Servers by AMX
MAX-MMS and MAX-IMS media servers are supported for G4 touch panels only, via Ethernet
control.
DXP-HT treats these devices essentially the same as any other Ethernet-controlled device (such as
MP3 players). There are just a few points to understand in order to add MAX servers to a DXP-HT
project:
The MAX-MMS and MAX-IMS servers are Ethernet-control only.
They must be used with AMX G4 touch panels (see Supported Touch Panels).
The MAX-AVM A/V Module(s) connected to the MAX-MMS server must be all set to
output to Zone 1.
Refer to the MAX-MMS and MAX-IMS Installation Guides (available online at
www.amx.com) for details.
Lighting
MP3 Players
• Philips
Pro DVD 175
• Sony
DVP-CX777ES
• Yamaha
DVD-C940
• Yamaha
DVD-S2300MK2
• AMX MAX-IMS / MAX-BSM
• AMX MAX-MMS / MAX-AVM
• AMX ALD-D48·
Note: (FW build 2.1 or later, via ISCP only)
• AMX Radia·
• Clipsal C-Bus·
Note: The Clipsal C-Bus and Dynalite lighting systems (DXP-
HT v1.1 or higher) are primarily used outside the U.S.·
HT v1.1 or higher) are primarily used outside the U.S.·
• DynaLite
• Lehigh DX2
• LiteTouch 5000LC·
• Lutron GRAFIK Eye·
• Lutron Homeworks Interactive·
• Lutron RadioRA·
• Vantage Q
• Tridonic DALI
Note: The Tridonic Lighting System type does not have feed-
back; therefore, the buttons in DXP-HT will not depress to
reflect feedback.
back; therefore, the buttons in DXP-HT will not depress to
reflect feedback.
• Other Ethernet - user supplied/modified light
• Other Serial - user supplied/modified lights.axi
• Audio ReQuest ARQ2Pro
• Imerge
SoundServer
• Integra
NAS-2.3 Net-Tune
• Marantz
DH9300