ASUS mypal a600 ユーザーズマニュアル
Avolites Pearl 2000 Operators Manual - page
27
P2000MAN.DOC 19/10/99 17:59
•
Press the blue PATCH button on the Program Select bank.
You are asked
to choose DIMMER or DEVICE.
If you have the VGA Screen option this will now display which DMX addresses are in
use, and which Fixture type is using them.
use, and which Fixture type is using them.
•
Press Softbutton B [CHOOSE A FIXTURE]
.
The disk is now read and a list of
available Personalities is presented on Softbuttons A to E. More Fixtures can be listed by
pressing Softbutton F [MORE]. Softbutton G [GO BACK] takes you back one page of
Fixtures.
pressing Softbutton F [MORE]. Softbutton G [GO BACK] takes you back one page of
Fixtures.
•
Select the Instrument you wish to patch from the list on the Softbuttons.
•
You will now be presented with a menu asking if you want to
automatically create Preset Focuses. Select Yes or No using the
Softbuttons.
Softbuttons.
Automatically creating Preset Focuses allows you to quickly create a show when
programming time is limited. In general the pre-programmed Preset Focuses are
arranged as 10 colours, 10 gobos and 10 positions on Preset Focus buttons 1 to 30.
programming time is limited. In general the pre-programmed Preset Focuses are
arranged as 10 colours, 10 gobos and 10 positions on Preset Focus buttons 1 to 30.
If you wish to totally customise how the Preset Focus buttons are used selecting NO
will probably be best. You cannot load automatically generated Preset Focuses
except when initially patching.
will probably be best. You cannot load automatically generated Preset Focuses
except when initially patching.
See Chapter 8 Preset Focuses for more details.
•
The disk is now read again and the Fixture is ready to patch.
Screen shows
how the different Attributes of the Fixture are presented, and displays a DMX address at
the top.
the top.
If you do not have the magnetic Attribute Bank label, it is worth copying this
information onto the Attribute Bank select buttons. (Use tape to prevent damage.)
information onto the Attribute Bank select buttons. (Use tape to prevent damage.)
You can use the address suggested by the desk or you can enter a new address on
the Numeric Keypad. (The advantage of using the provided address is that there is
no risk of conflict with previously patched Fixtures or Dimmers.)
the Numeric Keypad. (The advantage of using the provided address is that there is
no risk of conflict with previously patched Fixtures or Dimmers.)
Selecting page 0 will allow you to patch Handles 001 – 030.
Selecting page 1 will allow you to patch Handles 101 – 130
Selecting page 2 will allow you to patch Handles 201 – 230.
Selecting page 3 will allow you to patch Handles 301 – 330
•
Press a Preset Fader ADD button to patch the Fixture.
That Fixture is now
patched onto this Handle. The Screen will now show the next free DMX address. Again
you can use this or enter another address and patch more Fixtures by pressing Preset
Fader ADD buttons.
you can use this or enter another address and patch more Fixtures by pressing Preset
Fader ADD buttons.
•
When you have finished patching all your Fixtures of that type, you can
either press Softbutton A [SELECT ANOTHER DEVICE], to patch more
devices of a different kind, or Softbutton F [QUIT] or EXIT.
devices of a different kind, or Softbutton F [QUIT] or EXIT.
⇒
Exit as soon as you have finished patching since it is easy to leave the
desk in patch and then to inadvertently patch a Dimmer or Fixture when
meaning to recall a Preset Focus!
meaning to recall a Preset Focus!
⇒
Don’t try to patch Intelligent Fixtures onto Preset Fader SWOP buttons.
These are only available for patching Dimmer Channels onto. (See
Chapter 5 Patching.)
Chapter 5 Patching.)
•
Select the Page of Fixtures that you want to patch onto.
•
If desired, you can select another Page of Fixtures and continue
patching in the same way. You can use Preset Faders on the new page
that you have used on a previous Page of Fixtures.
that you have used on a previous Page of Fixtures.