ASUS pi-p55sp4v ユーザーズマニュアル

III. INSTALLATION

DRAM Memory Installation Procedures:

1. The SIMM memory modules will only fit in one orientation as shown because

of a "Plastic Safety Tab" on one end of the SIMM sockets which requires the
"Notched End" of the SIMM memory modules.

72 Pin SIMM DRAM Sockets & Module

4 3 2 1

Notched End

Bank1 Bank0

2. Press the memory module firmly into place starting from a 45 degree angle

making sure that all the contacts are aligned with the socket.

3. With your finger tips, rock the memory module into a vertical position so that

it clicks into place.

Metal Clip

Plastic Safety Tab (This Side Only)

Mounting Hole

72 Pin DRAM in SIMM Socket

4. The plastic guides should go through the two "Mounting Holes" on the sides

and the "Metal Clips" should snap on the other side.

5. To release the memory module, squeeze both "Metal Clips" outwards and rock

the module out of the "Metal Clips".

(DRAM Memory)