ASUS pi-p55sp4v ユーザーズマニュアル
ASUS P/I-P55SP4V User’s Manual
33
IV. BIOS SOFTWARE
Drive A, Drive B (None)
These fields record the types of floppy disk drives installed in your system. The
available options for drives A and B are:
These fields record the types of floppy disk drives installed in your system. The
available options for drives A and B are:
360KB, 5.25 in.
1.2MB, 5.25 in.
720KB, 3.5 in.
1.44MB, 3.5 in.
2.88MB, 3.5 in.
None
1.2MB, 5.25 in.
720KB, 3.5 in.
1.44MB, 3.5 in.
2.88MB, 3.5 in.
None
To enter the configuration value for a particular drive, highlight its corresponding
field and then select the drive type using the left- or right-arrow key.
field and then select the drive type using the left- or right-arrow key.
Floppy 3 Mode Support (Disabled)
This is the Japanese standard floppy drive. The standard stores 1.2MB in a 3.5"
diskette. This is normally disabled but you may choose from either:
This is the Japanese standard floppy drive. The standard stores 1.2MB in a 3.5"
diskette. This is normally disabled but you may choose from either:
Drive A
Drive B
Both
Disabled (Default)
Drive B
Both
Disabled (Default)
Video (EGA/VGA)
Set this field to the type of video display card installed in your system. The options
are:
Set this field to the type of video display card installed in your system. The options
are:
EGA/VGA (Default)
Mono (for Hercules or MDA)
CGA 40
CGA 80
Mono (for Hercules or MDA)
CGA 40
CGA 80
If you are using a VGA or any higher resolution card, choose the “EGA/VGA”
option.
option.
Halt On (All Errors)
This field determines which types of errors will cause the system to halt.
This field determines which types of errors will cause the system to halt.
All Errors (Default)
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
IV
. BIOS
(Standard CMOS)