ASUS tr-dlsr ユーザーズマニュアル
ASUS TR-DLSR User’s Manual
19
3. HARDWARE SETUP
System Memory
3. H/W SETUP
3.5 System Memory
This motherboard uses only Dual Inline Memory Modules (DIMMs). Four DIMM
sockets are available for 3.3Volt (power level) registered Synchronous Dynamic
Random Access Memory (SDRAM) of 16MB, 32MB, 64MB, 128MB, 256MB,
512MB, or 1GB densities with Serial Presence Detect (SPD) and Error Check and
Correction (ECC). The motherboard supports a memory configuration of up to 4GB.
One side (with memory chips) of the DIMM takes up one row on the motherboard.
sockets are available for 3.3Volt (power level) registered Synchronous Dynamic
Random Access Memory (SDRAM) of 16MB, 32MB, 64MB, 128MB, 256MB,
512MB, or 1GB densities with Serial Presence Detect (SPD) and Error Check and
Correction (ECC). The motherboard supports a memory configuration of up to 4GB.
One side (with memory chips) of the DIMM takes up one row on the motherboard.
3.5.1 Memory Configurations
Install memory in any of the following combinations:
DIMM Location
168-pin DIMM
Total Memory
Socket 0 (Rows 0&1)
SDRAM 64MB, 128MB, 256MB, 512MB, 1GB
x1
Socket 1 (Rows 2&3)
SDRAM 64MB, 128MB, 256MB, 512MB, 1GB
x1
Socket 2 (Rows 4&5)
SDRAM 64MB, 128MB, 256MB, 512MB, 1GB x1
Socket 3 (Rows 6&7)
SDRAM 64MB, 128MB, 256MB, 512MB, 1GB x1
Total System Memory (Max. 4GB)
=
IMPORTANT:
The system chipset only supports 64Mbit, 128Mbit, and 256Mbit
“registered” SDRAMs with ECC. Make sure to use the specified DIMM types for
smooth system operation.
smooth system operation.