ASUS TS500-E5 ユーザーズマニュアル

Chapter 2:  Hardware setup

2-20

The system is designed with an expansion card lock on the rear panel for you to 

install or remove an expansion card in less steps.

Ensure to unplug the power cord before installing or removing expansion 

cards. Failure to do so may cause severe damage to the motheboard and other 

system components!

1.  Before installing the expansion card, read the documentation that came with 

it and make the necessary hardware settings for the card.

2.  Lay the system on its side on a flat, stable surface.
3.  Use a Phillips screw driver to 

remove the metal slot cover 

opposite the slot where you wish to 

install an expansion card.

5.  Align the card golden fingers with 

the slot, and then press firmly until 

the card is completely seated on the 

slot.

4.  Lift the expansion card lock.