ASUS TS500-E5 ユーザーズマニュアル

ASUS TS500-E5

5-13

BIOS SETUP UTILITY

Main

IDE Configuration

SATA#1 Configuration

[Enhanced]

Configure SATA#1 as

[IDE]

SATA#2 Configuration

[Enhanced]

Hard Disk Write Protect

[Disabled]

←→

Select Screen

↑↓

Select Item

+- Change Field

F1 General Help

F10 Save and Exit

ESC Exit

5.3.5

IDE Configuration

The items in this menu allow you to set or change the configurations for the IDE

devices installed in the system. Select an item then press <Enter> if you wish to

configure the item.

Options

Disabled

Compatible

Enhanced

SATA#1–2 Configuration [Enhanced]

Configuration options: [Disabled] [Compatible] [Enhanced]

Configure SATA#1 as [IDE]

Sets the configuration for the Serial ATA connectors supported by the

Southbridge chip. Configuration options: [IDE] [RAID] [AHCI]
If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel

Matrix

Storage Technology configuration from the Serial ATA hard disk drives, set

this item to [RAID].
If you want to use the Serial ATA hard disk drives as Parallel ATA physical

storage devices, keep the default setting [IDE].
If you want the Serial ATA hard disk drives to use the Advanced Host Controller

Interface (AHCI), set this item to [AHCI]. The [AHCI] option allows the onboard

storage driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally optimize

the order of commands.

Hard Disk Write Protect [Disabled]

Disables or enables device write protection. This will be effective only if device is

accessed through BIOS. Configuration option: [Disabled] [Enabled]