ASUS v2-p5g45 ユーザーズマニュアル

5-30

Chapter 5: BIOS setup

USB.2.0.Controller.[Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

USB.2.0.Controller.Mode.[HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or

FullSpeed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]

The USB.2.0.Controller.Mode item appears only when you enable the USB.

2.0.Controller.

BIOS.EHCI.Hand-off.[Enabled]

Allows you to enable the support for operating systems without an EHCI hand-off

feature. Configuration options: [Disabled] [Enabled]

Legacy.USB.Support.[Auto]

Allows you to enable or disable the support for legacy USB devices. Setting to

[Auto] allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is detected,

the legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

5.5.5.

PCIPnP

The PCIPnP menu items allow you to change the advanced settings for PCI/PnP

devices.

Plug.And.Play.O/S.[No]

When set to [NO], BIOS configures all the devices in the system. When set to

[YES] and if you install a Plug and Play operating system, the operating system

configures the Plug and Play devices not required for boot.

Configuration options: [No] [Yes]

Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections

may cause system to malfunction.

Plug And Play O/S

[No]

NO: lets the BIOS

configure all the

devices in the system.

YES: lets the

operating system

configure Plug and

Play (PnP) devices not

required for boot if

your system has a Plug

and Play operating

system.

BIOS SETUP UTILITY

Advanced