Allen-Bradley devicenet modules in logix5000 control systems ユーザーズマニュアル
Publication DNET-UM004A-EN-P - March 2004
12-18 Troubleshoot a DeviceNet Network
97
Controller has set the scanner to the halted
mode.
mode.
1. See if the following bit of the command register for the
scanner is on:
…O.CommandRegister.HaltScanner
2. Cycle power to the scanner.
98
General firmware error.
Replace device.
99
System failure.
Replace device.
Status code
(decimal)
Description
Action