Antares avox ユーザーズマニュアル
23
Chapter 6: PUNCH Vocal Impact
Enhancer
P
UNCH is a processor that is designed
to optimize the level of a vocal track
to allow it to cut through a dense mix
with power and clarity. It provides a
to optimize the level of a vocal track
to allow it to cut through a dense mix
with power and clarity. It provides a
combination of compression, gain, limiting,
and overload protection with a user interface
designed for speed and simplicity.
and overload protection with a user interface
designed for speed and simplicity.
Controls
Input Level
This meter displays the input level of the signal
to be processed.
This meter displays the input level of the signal
to be processed.
Note: This display is for reference
purposes only. None of the following
purposes only. None of the following
controls affect the input level. The result of
all processing will be reflected on the Output
Level display described below.
all processing will be reflected on the Output
Level display described below.
Gain
This control allows you to increase the gain of
This control allows you to increase the gain of
your vocal. It will typically be set
in combination with the Impact
control below.
in combination with the Impact
control below.
The effect of this control will be
reflected on the Output Level
display.
reflected on the Output Level
display.
Command (Mac)/Control (PC)
click the control to reset it to its
default value of 0.0.
click the control to reset it to its
default value of 0.0.
Impact
This control lets you select
the amount of “punch” that
is added to the vocal. As you
increase the value of this
control, level variations in the
This control lets you select
the amount of “punch” that
is added to the vocal. As you
increase the value of this
control, level variations in the
vocal performance are equalized and their
level raised. The effect of the control will be
reflected on the Output Level display.
level raised. The effect of the control will be
reflected on the Output Level display.
Command (Mac)/Control (PC) click the control
to reset it to its default value of 0.
to reset it to its default value of 0.
Ceiling
This control allows you to attenuate the signal
after all other processing.
This control allows you to attenuate the signal
after all other processing.
Although PUNCH allows you to create a full-
level signal without risk of ugly distortion, it
will usually be wise to apply at least a little
attenuation here to allow yourself some room
for any further processing that might apply
gain. The default setting of -3.0 dB is a good
starting point, and you can always come back
and add in more if necessary as you continue
processing and the mix takes shape.
level signal without risk of ugly distortion, it
will usually be wise to apply at least a little
attenuation here to allow yourself some room
for any further processing that might apply
gain. The default setting of -3.0 dB is a good
starting point, and you can always come back
and add in more if necessary as you continue
processing and the mix takes shape.