applied-acoustics-systems ultra analog ユーザーズマニュアル

ページ / 60
20
Parameters
4
Parameters
The Ultra Analog is based on two similar module rows each containing an oscillator, a multi-mode
filter, an amplifier, a low-frequency oscillator and two envelope generators. Except for very slight
differences, the modules on each line are identical and so the description of the modules, unless
otherwise stated, is assumed to apply to the modules on each line.
4.1
General Functioning of the Interface
4.1.1
Tweaking Knobs and Sliders
All the knobs and sliders on the interface are selected by clicking on them. Once selected, they can
be controlled in different ways depending on the effect you want to achieve.
• For coarse adjustment click-hold on it and drag the mouse upwards or downwards to move
it clockwise or counter-clockwise.
• For fine adjustment, use the left or down arrow of the computer keyboard to move it counter-
clockwise and the right or up arrow to move it clockwise. The Page Up and Page Down
keys give the same result with slightly faster action.
• To move a control to a given position, place the mouse at this position and Shift-click (Win-
dows) or Option-click (Mac OS). To reach this position slowly, do the same, but use the
middle button of the mouse (Windows only).
• Knobs with a green LED above are moved directly to their center position by clicking on the
LED.
Remember that the keyboard shortcuts only affect the most recently selected control. The value
of the control currently selected is displayed on the toolbar at the top of the Ultra Analog window.
The number displayed on the counter is a value corresponding to the setting of the control currently
selected. For knobs and sliders, the reading is a value between 0 (turned fully to the left) and 127
(turned fully to the right).
4.1.2
Buttons
Buttons are switched on or off by clicking on them. The value appearing in toolbar and corre-
sponding to a button is 1 when the button is on and 0 when it is off.
4.1.3
Drop-down menus and Displays
Clicking on a control represented by a display with a down-pointing triangle on its right, such as the
Shape control of the Oscillator module, reveals a drop-down menu with a set of possible settings