Asko w6661 ユーザーズマニュアル
THE CONTROL PANEL
THE CONTROL PANEL
Models W6641 and W661 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a wash program, simply press
one of the preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.
one of the preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.
Door Open Button
Press to open the
glass door.
glass door.
Preset Programs
Press one of these buttons to
select a program.
select a program.
LCD Window
Displays the wash program, spin speed,
temperature settings, and program run time.
temperature settings, and program run time.
Power Button
Press to turn on
power to the
machine.
power to the
machine.
Program Selection Controls
These buttons allow you to customize the preset program settings,
such as wash temperatures, spin speed, rinses, display language,
etc. Refer to the Use and Care Guide for instructions.
such as wash temperatures, spin speed, rinses, display language,
etc. Refer to the Use and Care Guide for instructions.
Power Indicator Light
Glows when the power
is turned on.
is turned on.
Start/Stop Button
Press to start or
stop a program.
stop a program.
Preset Programs
Preset Programs
This model has four preset programs, as defined in the table below. To select a program, simply press one of the program buttons then press Start.
Preset
W a s h
Spin
# of
Short
Long
Program
Wash Cycle
Types of Laundry
Temp
(1)
Speed
(1)
(2)
Rinses
Spin
Spin
P1
Light wash
Normally soiled loads
140° F
1600 rpm
(3)
5
2
y e s
P2
Light wash
Normally soiled perma press
105° F
1600 rpm
(3)
5
2
y e s
P3
Quick wash
Lightly soiled fabrics
105° F
1600 rpm
(3)
3
0
y e s
P4
Hand wash
Washable silks, nylon, etc.
85° F
800 rpm
3
1
no
NOTES:
(1)
You can temporarily adjust the temperature settings and spin speed. (See “Temporary Program Changes” below.)
(2)
These are the maximum spin speed settings allowed for the program.
(3)
Model W640 has a maximum spin speed of 1400 rpm.
Temporary Program Changes
Temporary Program Changes
You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset
program you want to use then follow the instructions below. The settings will revert to normal at the end of the program.
program you want to use then follow the instructions below. The settings will revert to normal at the end of the program.
Temperature – Press
until the desired temperature displays in the LCD window. (The options are 85°, 105°, 120°, 140°, 160°, 175°, and
205°.) If you also want to change the spin speed, read the following paragraph, otherwise, press Start.
Spin Speed – Press
until the desired spin speed displays in the LCD window then press Start. (The spin speeds advance in 200 rpm
increments.)
You can easily customize the preset programs to best fit your l aundry needs. See “Customizing the Preset Programs” in your Use and Care Guide.
Power Button
Power Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be
on before you can open the glass door, set the programs or start the machine.
on before you can open the glass door, set the programs or start the machine.
Start/Stop Button
Start/Stop Button
This button starts or stops a program. To stop a program, press and hold this button for a few seconds. If you stop a program using the Start/
Stop button, you will have to reselect a program and press Start/Stop to restart the machine.
Stop button, you will have to reselect a program and press Start/Stop to restart the machine.
Doo
Door Open Button
r Open Button
If you need to open the door during a program, press and hold Door Open for a few seconds. The machine will stop and automatically drain
enough water so the door can be opened safely. The program will resume when you close the door. For instructions on how to open the door
manually in case of power failure, refer to your Use and Care Guide.
enough water so the door can be opened safely. The program will resume when you close the door. For instructions on how to open the door
manually in case of power failure, refer to your Use and Care Guide.
We know you’re excited about owning an ASKO washing machine and you’re anxious to get started, so here is a brief summary of the
operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
Washer Quick Start Guide
W6641/W6661