ati xclaim tv ユーザーズマニュアル

Page 3

Making the Connections

To receive maximum performance and a complete set of
features, connect XCLAIM TV to XCLAIM VR. Optionally,
XCLAIM TV can be connected to a Power Macintosh G3 that
has an Audio/Video option card installed.

Connecting XCLAIM TV to your computer

Use the Shut Down command to turn off your computer.

Connect the cable TV or antenna line to the CATV
input (

) on your XCLAIM TV tuner (refer to the

illustration on the next page).

Noting the pin orientation,

gently

insert one end of

the enhanced S-video cable into the S-Video Output
port (

) on your XCLAIM TV tuner.

For XCLAIM VR installations

, insert the other end of

the cable into the enhanced S-Video Input port
(

S VID IN

)

on the back of your XCLAIM VR card,

for G3-only installations

, insert the other end of the

cable into the enhanced S-Video Input port on the
Audio/Video option card.

Static electricity can damage sensitive electronic
components. Discharge your bodyÕs static electric
charge by touching a grounded surface Ñ for
example, the metal area of the computer chassis Ñ
before performing any hardware procedure.

The manufacturer assumes no liability for any
damage, caused directly or indirectly, by improper
installation of components by unauthorized service
personnel.

If you do not feel comfortable performing

the installation, consult a qualiÞed technician

Make sure power is off during installation

;

otherwise, damage to the TV tuner, the graphics
accelerator card, and injury to yourself may result.