3com 900-0387-01 ユーザーズマニュアル
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
V6000 Analog Integrated Branch Office Solution Installation Guide V6000 Analog Integrated Branch Office Sol
26
Figure 7
MP-104 Endpoint Phone Number Table
3 Connect the RJ-11 cable of telephone
A
to port 1 of module 1 (where module 1 is an
FXS module) on the V6000. Connect the RJ-11 cable of telephone
B
to port 1 on the
MP-104 gateway.
4 Offhook the receiver of telephone
A
(whose number you defined as 101) and dial 301;
telephone
B
connected to the MP-104 rings.
5 Offhook telephone
B
and test the line for voice.
To make a call from telephone
B
on the MP-104 to telephone
A
on the V6000, you
must define the internal routing table on the MP-104.