3com corebuilder 10002211 ユーザーズマニュアル

C

ORE

B

UILDER

 6000 E

XTENDED

 S

WITCHING

 S

OFTWARE

 R

EVISION

 8.2.3 

For each slot that you enter, the system asks for specific port numbers:

Select Ethernet port(s) (1-8,all):

3 Enter the number(s) of the port(s) that you want to configure:

To select the default  

, press Return.

Enter 

enable

 or 

disable

 to select the IFM mode for each selected port:

Enter new value (disabled, enabled) [disabled]:

4 Enter 

 to set the port to IFM mode or 

 to deactivate IFM 

for the port. 

To select the port’s current setting, shown in brackets, press Return. This 
action leaves the port setting unchanged.

5 Repeat step 4 to configure all selected ports in all selected slots.

FESM support has been added to the Bridge MIB.

To support Filter Builder software, this revision adds the Filter MIB (address 
group, port group, and bridge packet filter program). See the Filter Builder 
Getting Started Guide, which is shipped with the Filter Builder software, for 
more information about the Filter Builder product.

You can now use File Transfer Protocol (FTP) to transfer a user-defined 
packet filter program from a remote server to a CoreBuilder switching 
module through the SNMP lpsFtTable MIB.

Modifications to the telnet and rlogin features of the CoreBuilder 6000 
system now allow you to preempt users by forcing a disconnection. This 
administrative feature requires that you use the system Administer 
password at the Administration Console.