3com WX4400 3CRWX440095A ユーザーズマニュアル
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Configuring WPA
295
Assigning the Service Profile to Radios and Enabling the Radios
After you configure WPA settings in a service profile, you can map the
service profile to a radio profile, assign the radio profile to radios, and
enable the radios to activate the settings.
service profile to a radio profile, assign the radio profile to radios, and
enable the radios to activate the settings.
To map a service profile to a radio profile, use the following command:
set radio-profile name service-profile name
To assign a radio profile to radios and enable the radios, use the following
command:
command:
set ap port-list radio {1 | 2} radio-profile name
mode {enable | disable}
mode {enable | disable}
To map service profile wpa to radio profile bldg1, type the following
command:
command:
WX1200# set radio-profile blgd1 service-profile wpa
success: change accepted.
success: change accepted.
To assign radio profile bldg1 to radio 1 on ports 1-3, and 5 and enable
the radios, type the following command:
the radios, type the following command:
WX1200# set ap 1-3,5 radio 1 radio-profile bldg1 mode enable
success: change accepted.
success: change accepted.
To assign radio profile bldg1 to radio 2 on ports 1-2 and port 6 and
enable the radios, type the following command:
enable the radios, type the following command:
WX1200# set ap 1-2,6 radio 2 radio-profile bldg1 mode enable
success: change accepted.
success: change accepted.