3com WX4400 3CRWX440095A ユーザーズマニュアル

C

HAPTER

 3: C

ONFIGURING

 W

IRELESS

 S

ERVICES

11 Click Next. Type or select the name of the VLAN you want to place SVP 

users in. For this example, use voice-vlan.

12 Click Create to add MAC users to the switch’s local database.

a In the User MAC Address box, type the MAC address for the user 

device, using colons (:) as delimiters. You must specify all 6 bytes of 
the MAC address.

b In the MAC User Group list, select the MAC user group that the user 

device belongs to, if the group is already configured. 

c In the VLAN Name box, select or type the name of the VLAN that the 

user device belongs to (1 to 16 alphanumeric characters, with no 
spaces or tabs). The WX switch will authorize the user for that VLAN. 
For more information on VLANs, see “Viewing and Configuring 
VLANs” in the 

d Click Next. In the attribute row you want to configure, click the 

Attribute Value column. (See the “Authorization Attributes” section in 
the “Configuring Authentication, Authorization, and Accounting 
Parameters” chapter of the 

e Click Finish.

13 Click Next. Select RadioProfileVoic in the Radio Profiles list.

14 Click Finish.

This procedure is similar to the procedure in “Set Up VLANs on WX 
Switches” on page 64, except IGMP snooping is disabled on the VLAN.

1 Select Configuration on the toolbar.

2 In the Organizer panel, expand the WX switch. 

3 Expand System, then select VLANs.

4 In the Task List panel, select VLAN.

The Create VLAN wizard is displayed.

5 Enter a name such as vlan-voice and use the VLAN ID suggested by the 

wizard.