AirLive ov-1200slc-20 ユーザーズマニュアル

 

 
Thank you for choosing the 1000Base Gigabit Ethernet Media Converter, The Converter 
introduced here provides one channel media conversion between 1000BASE-SX/LX . 
 
 

The Media Converter is a network technology specified by IEEE 802.3 10BASE-T, 
IEEE802.3u 100BASE-TX, 100BASE-FX standards.     

y 

One-channel media conversion between 1000BASE-SX/LX and 1000BASE-SX/LX. 

y 

Fiber media allows: multi-mode fiber and single-mode fiber using SC connector 

y 

Full wire-speed forwarding rate 

y 

Front panel status LEDs 

y 

Used as a stand-alone device or with a chassis   

y 

Hot-swappable when used with a chassis 

 
 

This chapter gives step-by-step installation instructions for the Converter. 
 

As with any electric device, you should place the equipment where it will not be subjected 
to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site 
you select should meet the following requirements: 
1.  The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 

degrees Celsius). 

2.  The relative humidity should be less than 90 percent, non-condensing. 
3.  Surrounding electrical devices should not exceed the electromagnetic field (RFC) 

standards for IEC 801-3, Level 2 (3V/M) field strength. 

4.  Make sure that the equipment receives adequate ventilation. Do not block the 

ventilation holes on each side of the switch or the fan exhaust port on the side or rear 
of the equipment. 

5.  The power outlet should be within 1.8 meters of the switch. 

1 

AirLive OV-1200SLC/20 User’s Manual