australian-monitor tx8202 パンフレット

8 Channel Stereo Mic/Line 

Mixer with Direct Outputs

The TX8202 is a high performance 8 channel stereo mixer suitable for desk or rack mounting.

The TX8202 has four active balanced mic/line inputs and four stereo line inputs. Each channel 

features recessed treble, bass and pan controls. Mic/Line level can be adjusted per channel via a 

dip switch. All mic and line input connections are via 3 pin XLR female sockets, and all stereo line 

input connections are via dual female RCA sockets. Both the Left and Right outputs are balanced 

and feature 3 pin male XLR sockets. A stereo tape output using dual female RCA sockets is also 

provided. A ¼” stereo headphone socket is included on the front panel. The rear panel includes a 

terminal block for activation of the optional Tone Generator. The fi rst four channels feature a line 

level direct output which can be used to feed additional amplifi ers, mixers or recording devices. 

An internal jumper allows the fi rst four inputs to be removed from the master left/right outputs 

whilst still retaining their direct output function.

Front panel controls include Master Left and Right Outputs plus individual channel level controls. 

Each channel also features a recessed, screwdriver adjustable treble, bass and pan control. 

A four position dip switch (mic/line, phantom power, routing) is provided for the fi rst four channels. 

A 7 segment LED meter is provided for both the Left and Right Outputs. A power “on” orange LED 

is part of the LED meter. An optional remote master VCA is available for remote master volume 

control.

The optional VCA control module (AMVCA) allows the master volume to be remotely controlled. 

External VCA control would normally be via potentiometer connected to a two wire rear panel 

barrier strip.

Muting is standard on the unit for channels one and two. Both channels have equal priority and 

will mute channels 3-8 when signal is present. The muting function can be disabled by moving 

an internal jumper.

 Bell, Pre-Announce Chime, Evacuate and Alert are included in the unit. Each tone can be 

activated by a simple contact closure using the rear panel terminal block.

Phantom Power (15V DC) is available on all mic inputs and can be disabled if required via a 

dip switch.

AM Tone1 – This module provides simple 4 tone generation for the MX series mixers.

Tones available are alert, evac, pre-announce, and bell.

AM Tone – This module allows for high quality pre-announce, bell, alert, evac, tones, 

to be generated on board the MX series mixers.

AM VCA – This module allows for a remote master volume control to be used with the 

MX series mixers.