avolites pearl exper ttitan ユーザーズマニュアル

Copyright Avolites Limited 2010

7. Chases - Page 87

PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00

times you want to edit.

3> Use the softkey options to change the times or settings.
4> Repeat from 2 to change other times or settings.

•

You can change a range of cues all at once by dragging across

the grid to select multiple cells, or you can use wheel B to select

multiple cells for editing.

Using Unfold:

1> Press the blue Unfold button, then the Swop button of the

chase to be edited.

2> Press [Edit Times] then the Swop button of the unfolded cue

you want to edit.

3> Set up the timing options as required. The options are

described below.

4> Press Unfold to get out of unfold mode.

Initially all the timing options are set to Global. You can cancel any

individual timings and set the time back to global timings by pressing

the softkey for the option then pressing G [Use Global].
The timing options for the cue are:

•

Delay

•

Fade (in)

•

Fade Out

•

Fixture Overlap

•

Linking with previous step

•

Attribute times (see next section)

Linking can be set to [Link After Previous] (the chase will run

automatically) or [Link Wait For Go] which will stop the chase until

you press Go.

7.6.3

Setting attribute fade times for a cue in a chase

For each cue in a chase, you can set individual fade times for each

attribute group (such as Position). If you set a time, it overrides the

normal times. You can use the Cue View window or the Unfold

function to set attribute times.
To set an attribute group fade time:

1> Press View or the blue Unfold button, then the Swop button of

the chase to be edited.

2> Press [Edit Times] then click on or touch the cue you want to

edit in the Playback View, or if using Unfold, press the Swop

button of the unfolded cue you want to edit.

3> Press the Attribute Bank button (right hand side) for the

attribute you want to change.

4> Press [Delay] to set delay time or [Set fade] to set fade time.
5> Type the new time using the numeric keypad and press Enter to

save it, or press [Use Global] to delete the attribute times and

go back to the normal times.

6> Press Enter to save the changes.