HP 510 ユーザーズマニュアル
Paper loading problems
The front panel keeps indicating that paper is misaligned or incorrectly positioned.
Roll paper
•
Roll paper
•
The roll paper may be loaded the wrong way. The paper should load over the roll towards you, see
•
The paper may be skewed. The right-hand edge must be parallel to the blue line on the front paper deflector.
•
Ensure that the paper is wrapped tightly on the roll.
•
Check that the paper is correctly loaded onto the spindle, see
.
Sheet paper
•
•
The sheet must be loaded with the right-hand edge against the blue line on the printer platen and the front
edge against the blue line just after the pinch rollers, see
edge against the blue line just after the pinch rollers, see
•
The paper may be crumpled or warped or may have irregular edges.
•
If you are using hand-cut paper, the edges may not form a right angle or they may be rough. Do not use hand-
cut paper. Use only purchased sheet paper.
cut paper. Use only purchased sheet paper.
•
If the paper is curled with the curl up it will be very difficult to load. It is easier to load it with the curl down