Autotek autocad raster design 2010 ユーザーズマニュアル
4 Select Stop At Intersections to determine whether ProdNameShort detects
segments or entire primitives.
5 Select Use Raster Pick Gravity check box to define the size of the area
around the point you pick in which ProdNameShort can search for raster.
6 If you selected Use Raster Pick Gravity, enter a numerical pixel width
value in the Pick Aperture (Pixels) text box to define a new aperture size.
7 Under Multi Pick Options, enter a value in the Float Tolerance (Pixels)
box.
8 Under Non-Continuous Linetype Detection, enter a value in the Max
Dash Length (Pixels) and the Max Blank Length (Pixels) box, or click Pick
to select the length from an image.
to select the length from an image.
9 Click OK to exit the dialog box.
Quick Reference
Menu
Image ➤ Options
Raster Design Toolbar
Command Line
ioptions
Dialog Box
(page
357)
REM Settings
These settings specify the default color of REM objects, and the way REM
objects are copied to the clipboard.
objects are copied to the clipboard.
The default color of REM objects is red. If you define REM objects in color or
grayscale images, only the vector boundary of the object is red. If you define
REM objects in a bitonal image, the entire object is red. Enhanced bitonal
region objects also have a red vector boundary.
grayscale images, only the vector boundary of the object is red. If you define
REM objects in a bitonal image, the entire object is red. Enhanced bitonal
region objects also have a red vector boundary.
REM Settings | 265