HP color laserjet 3000n ユーザーズマニュアル
8-30
ENWW
To clear jams in Tray 1
1
Remove all media from Tray 1.
2
Pull out Tray 1 and place it on a flat surface. Remove any wrinkled
or curled media from the tray.
or curled media from the tray.
3
Grasp any jammed or torn media by both corners and pull up and
out of the printer. Reinsert Tray 1.
out of the printer. Reinsert Tray 1.
4
Load media in Tray 1. Check that the media is loaded properly. For
more information on loading media in Tray 1, see “
more information on loading media in Tray 1, see “
.”
5
Press
(help button) to clear the message in the LCD control
panel, and then press
(select button) to continue printing.
Jam recovery
The printer automatically provides jam recovery, a feature that allows
you to set whether the printer should attempt to automatically reprint
jammed pages. The options are as follows:
you to set whether the printer should attempt to automatically reprint
jammed pages. The options are as follows:
z
AUTO. Printer will attempt to reprint jammed pages when sufficient
memory is available. This is the default setting for the printer.
memory is available. This is the default setting for the printer.
z
OFF. Printer will not attempt to reprint jammed pages.
z
ON. Printer will reprint any jammed page. Additional printer memory
is required for this setting, so if additional memory is not installed,
overall printer performance may suffer.
is required for this setting, so if additional memory is not installed,
overall printer performance may suffer.