HP color laserjet 2550 series サービスマニュアル

The Attention light is blinking and
the Go light is on. The printer stops
printing.

41103

A manual-feed job was sent to the
printer, and the printer is waiting
for the special media (41103).

1.

Load media into tray 1.

2.

If the printer does not begin
printing after the media has

been reloaded, press 

(Go). Or, press 

 (Go) to

try to print from another tray if
another tray is installed.

Single-page print jobs are not

printed when 

 (Go) is pressed.

After loading media into tray 1,
reprint the page.

After loading media into tray 1 and

pressing 

 (Go), multiple-page

print jobs continue to print, but the
page that was to be printed when
the printer stopped printing does
not print. Reprint the page after
the current print job is complete.

The printer has finished printing
the first side of a manual-duplex
job, and the printer is waiting for
the pages to be reloaded so it can
print the second side.

1.

Reload the pages.

2.

If the printer does not begin
printing after the pages have

been reloaded, press 

 (Go).

Someone is trying to print by
Source (tray) and there is no
media in the selected tray.

1.

Add media to the selected
tray to print from it.

2.

Press 

 (Go) to try to print

from another tray.

The print image is larger than the
size of media in the tray.

Load the correct-size media and

then press 

 (Go).

The printer has an Attention with
Ability to Continue error.

1.

Press 

 (Go) for the printer

to attempt to recover from the
error and print whatever data
it can. If successful, the
printer completes the job
while the Ready light blinks.

2.

If unsuccessful, the Attention
with Ability to Continue
message continues to

appear. Press 

 (Cancel

Job) to cancel the print job. If
the problem has been
resolved, the printer returns to
the Ready state (Ready light
on).

Chapter 6 Troubleshooting

ENWW