HP compaq t5000 ユーザーズマニュアル

You can log on to your thin client either automatically or manually.

The default for the XPe-based thin client is automatic logon. The 
administrator can use the HP Logon Manager in the Control Panel to 
enable/disable auto logon and change the auto logon user name, 
password, and domain. Only the administrator logon account can 
change auto logon properties.

✎

To save changes, be sure to disable the write filter cache or issue the 

 command anytime during the current boot session. See 

 for information about 

the write filter and instructions for disabling the write filter. Enable 
the write filter when you no longer want permanent changes.

Enabling automatic logon bypasses the Log On to Windows dialog 
box. To log on as a different user while auto logon is enabled, press 
and hold 

 while clicking Start > Shut Down > Log Off. This 

displays the Log On to Windows dialog box and allows you to 
manually enter the logon information.

When automatic logon is disabled, thin client startup displays the Log 
On to Windows dialog box.

Type the logon information in the User Name and Password text 
boxes. Note the following:

■

For a user logon account, the factory-default user name and 
password are both 

.

■

For an administrator logon account, the factory-default user name 
and password are both 

.

✎

For security purposes, HP recommends that you change the 
passwords from their default values. An administrator can change 
passwords by pressing 

 to open the Windows Security 

dialog box, and then selecting Change Password. You cannot change 
the password when logged on as a user.