HP cv7540 ユーザーズマニュアル

Setting Up the Monitor 

Removing the Monitor Base 

In the event that you need to disassemble the base from the 
monitor, position the monitor bottom side up and follow these 
instructions: 

1.  If you must remove the base attachment, release the catch and 

slide the base toward the back of the monitor. 

2. Lift the base up and away from the monitor. 

Connecting the Cables 

Before setting up the monitor, place it in a convenient, 
well-ventilated location near the computer. 

1. Turn off the power to the computer and other peripheral 

devices. 

2. Connect the power cord 1 to the back of the monitor, then 

connect the power cord to a power outlet. 

3. Connect the video cable (blue connector) 2 from the back of 

the monitor to the blue 15-pin connector on the back of the 
computer. Tighten the cable screws to secure the cable to the 
connector. 

Ä

CAUTION: To avoid damaging the video cable, ensure that the 
cable aligns with the 15-pin connector. Do not force the cable onto 
the connector. 

3–2 

User Guide