HP l1950 ユーザーズマニュアル
Icon
Main Menu
Submenu
Description
Default Video Input
Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
Analog — VGA — Selects VGA input.
Digital — DVI — Selects DVI input.
Information
Selects and displays important information about the
monitor.
monitor.
Current Settings
Provides the current input video mode.
Recommended
Settings
Settings
Provides the recommended resolution mode and
refresh rate for the monitor.
refresh rate for the monitor.
Serial Number
Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
number is needed if contacting HP technical support.
Version
Reports the firmware version of the monitor.
Backlight Hours
Reports the total hours of backlight operation.
Service Support: http://
www.hp.com/support
www.hp.com/support
Factory Reset
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
to the factory default settings, except the Language.
Exit
Exits the OSD menu screen.
Table 4-2
OSD Menu (continued)
28
Chapter 4 Operating the Monitor