HP l717g ユーザーズマニュアル
Setting Up the Monitor
Mounting the Monitor
The monitor panel can be mounted on a wall, a swing arm, or
other mounting fixture.
other mounting fixture.
1. If the stand base is attached, follow the procedure in
“Removing the Stand Base” at the beginning of this chapter.
Ä
CAUTION: Before beginning to disassemble the monitor, be sure
the monitor is turned off and the power and signal cables are both
disconnected. If your monitor has a connected audio cable,
disconnect it.
the monitor is turned off and the power and signal cables are both
disconnected. If your monitor has a connected audio cable,
disconnect it.
After the base is removed from the monitor, four threaded
mounting holes are exposed on the monitor back panel to be used
for mounting purposes. These mounting holes are spaced 100mm
apart and are compliant with the Video Electronics Standards
Association (VESA) standard for mounting flat panel displays.
mounting holes are exposed on the monitor back panel to be used
for mounting purposes. These mounting holes are spaced 100mm
apart and are compliant with the Video Electronics Standards
Association (VESA) standard for mounting flat panel displays.
Ä
CAUTION: This monitor supports the VESA industry standard
100mm mounting holes. To attach a third party mounting solution to
the monitor, four 4mm, 0.7 pitch, and 10mm long screws are
required (not provided with the monitor). Longer screws should not be
used because they may damage the monitor. It is important to verify
that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display
panel. For best performance, it is important to use the power and
video cable provided with the monitor.
100mm mounting holes. To attach a third party mounting solution to
the monitor, four 4mm, 0.7 pitch, and 10mm long screws are
required (not provided with the monitor). Longer screws should not be
used because they may damage the monitor. It is important to verify
that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display
panel. For best performance, it is important to use the power and
video cable provided with the monitor.
User Guide
3–9