HP laserjet 3390, 3392 all-in-one サービスマニュアル
11.
Pull on the all-in-one chassis at the top to spread the all-in-one frame and release the fuser from
the frame.
the frame.
Figure 5-68
Remove the fuser (10 of 11)
12.
Pull the fuser out of the all-in-one at an angle so that the delivery-roller shaft clears the hole
(callout 13) in the chassis. Carefully remove the wire-harnesses from the guide in the lower-left
corner of the fuser.
(callout 13) in the chassis. Carefully remove the wire-harnesses from the guide in the lower-left
corner of the fuser.
13
Figure 5-69
Remove the fuser (11 of 11)
162
Chapter 5 Removal and replacement
ENWW