HP la1751g ユーザーズマニュアル

Factory Reset

Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.

Source Control

 

Selects the video input signal. VGA is the factory
default.

 

 

DVI

Selects DVI as the video input signal.

 

 

VGA

Selects VGA as the video input signal.

 

Default Source

Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The choices are:

●

DVI

●

VGA

The factory default is VGA.

 

Auto-Switch Source

Turns the system's automatic video signal input to On
or Off. The factory default is On.

Exit

Exits the OSD menu screen.

Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock
Phase.

The Clock and Clock Phase controls are adjustable only when using an analog input. These

controls are not adjustable for digital inputs.

The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock
setting. Use these controls only when the auto-adjustment function does not provide a satisfactory
image.

●

Clock—Increases/decreases the value to minimize any vertical bars or stripes visible on the screen
background.

●

Clock Phase—Increases/decreases the value to minimize video distortion or video jitter.

When using the controls, you will obtain the best results by using the auto-adjustment pattern

software utility provided on the CD.

When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue
adjusting the values until the distortion disappears. To restore the factory settings, select Yes from the
Factory Reset menu in the on-screen display.

24

Chapter 4   Operating the Monitor

ENWW