HP lp2465 ユーザーズマニュアル
Using the Accessory Rails
The monitor features accessory rails on the rear that may be used to mount optional devices, such
as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional
device for detailed mounting instructions.
as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional
device for detailed mounting instructions.
Figure 3-13
Using the Accessory Rails Feature
Removing the Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing
arm, or other mounting fixture.
arm, or other mounting fixture.
This monitor has a Quick Release mechanism that allows you to easily remove and replace the
monitor panel to the pedestal base.
monitor panel to the pedestal base.
CAUTION
Before beginning to disassemble the monitor, be sure the monitor is turned off
and the power and signal cables are both disconnected. If the monitor has a connected audio
cable, disconnect it.
cable, disconnect it.
1.
Disconnect and remove the signal and power cables from the back of the monitor.
2.
Slide the quick release latch (1) on the pedestal base to the side (either right or left).
14 Chapter 3 Setting Up the Monitor