HP omnibook xe3 サービスマニュアル
2-6
Removal and Replacement
HP OmniBook XE3
3.
Press outward to release the latches at the sides of the SDRAM module, so the free edge of the
module pops up.
module pops up.
Figure 2-4. Removing an SDRAM Module
4.
Pull the module out of the connector.
Reassembly Notes
•
Gently press the SDRAM module into the connector at an angle of about 30°, until it is fully
inserted. Then press down on both sides of the module until the latches snap closed.
inserted. Then press down on both sides of the module until the latches snap closed.