HP omnibook xt1000 サービスマニュアル
HP Pavilion zt1100/xz100 Omnibook xt1000
Removal and Replacement
2-7
Figure 2-5. Removing the Hard Disk Tray
Reassembly Notes
• Insert the connector end of the drive through the opening in the tray, then lower the drive into
place.
• Carefully slide the hard drive assembly into its compartment. Press firmly to make sure the
connector seats properly.
Important
If you are installing a new hard disk drive, install the factory software and operating system on the
drive before loading any additional software—see “Recovering and Reinstalling Software,” below.
drive before loading any additional software—see “Recovering and Reinstalling Software,” below.
Screws,
M2.5x4mm (2)
M2.5x4mm (2)
Screws,
M2.5x4mm (2)
M2.5x4mm (2)