HP p4827 ユーザーズマニュアル

l1725.fm  Page 27  Friday, March 1, 2002   1:11 AM

1

hp L1725 LCD Monitor 

Using the Monitor 

3  Press the Menu button to exit the setting screen. 

• If the viewable image is positioned too far too the right or left, 

you can adjust its horizontal position. In the Horizontal Position 
screen, pressing the left Browse button moves the horizontal 
position to the left, and pressing the right Browse button moves 
the horizontal position to the right. 

• If the viewable image is positioned too high or low, you can 

adjust its vertical position. In the Vertical Position screen, 
pressing the left Browse button moves the vertical position down, 
and pressing the right Browse button moves the vertical position 
up. 

• If vertical bars appear on your screen you can reduce or 

eliminate them using the Clock function. In the Clock screen, 
pressing the left Browse button decreases the frequency of the 
sampling clock for VGA signals, and pressing the right Browse 
button increases the frequency. 

• If horizontal bars appear on your screen, you can reduce or 

eliminate them using the Phase function. In the Phase screen, 
pressing the left Browse button decreases the phase of the VGA 
signal sampling, and pressing the right Browse button increases 
the phase. 

• If the display seems too sharp, you can adjust the contrast 

setting. In the Contrast screen, pressing the left Browse button 
decreases the contrast, and pressing the right Browse button 
increases the contrast. 

• If the display appears too bright or dim, you can adjust the 

brightness. In the Brightness screen, pressing the left Browse 
button decreases the brightness, and pressing the right Browse 
button increases the brightness. 

For the best image quality from your HP LCD monitor, you may need 
to adjust VGA specific parameters such as position, phase and 
clock. 

The following procedure only applies when using the VGA

interface, it is not required when using the DVI interface. 

English 27