HP pavilion lc3700n ユーザーズマニュアル

Select EZ Setup to start the first-time setup wizard. 

To start EZ Setup:

Press Menu on the remote control.

Press the Up or Down arrow buttons to highlight 
Setup. Press Select.

Highlight EZ Setup, and then press Select.

If you set the Secret No., enter your 4-digit secret 
number. See “Secret number setting for parental 
control (AV input mode only)” on page 65.

Follow the setup wizard instructions. For more 
information, refer to “Using the First-Time Setup 
Wizard” on page 29.

If the initial setup does not find all the channels, use 
CH Setup to manually set the antenna, scan, and find 
the channels.

The Air/Cable option defines what type of antenna and 
cable are connected to the TV analog and digital inputs.

If channels are missing, or no channels are found after 
running CH Search, check your antenna connections, 
and then perform CH Setup again.

The CH Search option makes the TV look for all 
channels viewable from the signals connected to the TV 
inputs.

In the CH Search menu, highlight Yes for Analog, 
Digital (Air), and Digital (Cable). Then highlight 
Search Start and press Select; the scan automatically 
searches the selected inputs for channels.

Use the CH Memory option to remove channels from 
the list of found channels. The removed channel does 
not appear when using the Channel buttons.

Highlight CH Memory and press Select.

Highlight Analog, Digital (Air), Digital (Cable), or 
CableCARD, and then press Select.

Highlight the channel and press Select.

Select Skip, highlight On, and press Select.

■

On removes the channel.

■

Off does not skip the channel.

In order to receive digital air broadcasts, you need a 
digital broadcast antenna. You can set the antenna 
configuration through the Antenna Setting screen. 
Adjust for broadcast digital TV signal and channel 
strength using the Antenna Setup – Digital option.

■

Signal Strength shows the current and 
maximum signal strength.

Fine Sync

Manually adjusts the image 
from a PC.

Input Label

Selects a name (from a list) for 
the Input source.

Picture Flip

Sets the orientation of the 
picture.

Standby Mode

Sets the TV mode for standby.

Language

Sets the OSD language.

n