HP pavilion lc3700n ユーザーズマニュアル

A red light blinks when I press a key, 
but my home entertainment equipment 
does not respond.

Make sure the remote control is aimed at your home entertainment 
equipment and is not farther than 16.4 feet (5 meters) away.

The selected mode button (TV, DVD, 
STB, PVR, Aux, VCR, Audio, or HP) 
does not blink when a button on the 
remote control is pressed.

Replace the batteries with three (3) AAA non-rechargeable batteries.

The remote control does not control 
home entertainment equipment, or the 
commands are not working properly.

Try all listed codes for the equipment brands being set up. Make sure they 
can be operated with an infrared remote control. 

Changing channels does not work 
properly.

If the original remote control required pressing Select to change channels, 
press Enter on the remote control after entering the channel number.

CH +, and CH – do not work for your 
RCA TV.

Due to RCA design (1983–1987), only the original remote control 
operate these functions.

Failed to receive broadcast.

E202

Check the antenna cable. Check that the antenna is correctly set up.

No broadcast now.

E203

Check the broadcast time in the program guide.

Record/playback may fail on the 
selected model.

Displayed when you have selected a device that is not compatible with the 
TV or that does not have DTLA copy protection technology installed.

Wrong connection or no i.LINK 
connection was found. Refer to 
User’s Guide on connection.

Displayed when a problem is experienced with a connection using i.LINK 
cable. Check the connection, and reconnect the cable if necessary.

The selected model is disabled to 
record/play. Check that no other 
model is used.

Displayed when the device you have selected is already being used by 
another i.LINK connected device. To operate the selected device from the 
TV, you will first have to override control from the other device.