HP pavilion md5880n ユーザーズマニュアル

Fixing Problems

Channel Problems

If a scrolling or cut-off image is

displayed for a computer

connection

• Press Settings, go to Picture > Advanced picture > Auto-sync, press OK, and

select Yes.

• Press Settings, go to Picture > Advanced picture, and adjust V Position and H

Position.

• Turn everything off. Then power on the TV first and power on the notebook or

desktop computer second.

• If the previous steps do not correct the display image, adjust the resolution of

the notebook or desktop computer to 1024×768, 1280×768, or 1366×768

pixels (60 Hz refresh rate). If the computer has multiple monitors, adjust the

resolution of the monitor assigned to the TV.

If the image is flickering or unstable

for a computer connection

• Press Settings, go to Picture > Advanced picture > Auto-sync, press OK, and

select Yes.

• Press Settings, go to Picture > Advanced picture, and adjust Frequency or

Tracking.

If you cannot find the channel you

want on the TV

• Press Device one or more times to select the device you want to tune.

Depending on your system setup, you might need to tune channels on the TV

or on an external device, such as a set-top cable box or satellite receiver.

• If you are tuning an external device, be sure the TV is showing this source.
• If you are tuning the TV, press Source and check whether you are viewing the

antenna input or cable input. Each of these inputs has a separate list of

channels. For example, if you want to watch a cable channel, you must select

the cable input.

• If the channel is not in the channel list, type the channel number and press

Enter. Then press Settings and go to Setup > Channel setup > Add/Remove

antenna or Add/Remove cable. Press green/PIP to add the channel.

If you cannot receive one or more

channels on the TV

• Press Source and check whether you are viewing the antenna input or cable

input. Each of these inputs has a separate list of channels.

• Press Settings and go to Setup > Channel setup > Auto search antenna or

Auto search cable; then press OK. This finds all currently available channels

for the antenna or cable input.

• Some cable channels are scrambled or specially formatted and require a

CableCARD or set-top cable box to receive them. Check with your cable

provider.