HP proliant ml370 ユーザーズマニュアル
Removal and replacement procedures 39
3.
Remove the fan.
To replace the component, reverse the removal procedure.
Expansion slot cover
To remove the component:
1.
Power down the server (on page
2.
Extend the server from the rack, if applicable ("
" on page
3.
Remove the access panel ("
4.
Press the slot release lever and swing the slot release lever upward.
5.
Remove the expansion slot cover.
Retain the slot cover for future use.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots
have either an expansion slot cover or an expansion board installed.