HP proliant ml370 ユーザーズマニュアル
Specifications 89
Specification Value
Weight (maximum)
40.8 kg (110 lb)
Weight (when lightly loaded) 24.9 kg (55 lb)
Input requirements
Rated input voltage
100 VAC to 240 VAC *
Rated input frequency
47 Hz to 63 Hz
Rated input current
10 A (100 V) to 6.7 A (200 V)
Rated input power
1500 W
BTUs per hour
2730
Power supply output
Rated steady-state power
800 W (low line), 1000 W (high line)
Maximum peak power
1000 W (low line), 1200 W (high line)
* 100 to 127 VAC is required for 10 A; 200 to 240 VAC is required for 6.7 A.
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (
server, refer to the HP Enterprise Configurator website (
FBDIMM specifications
CAUTION: Be sure to install FBDIMMs in the proper configuration. Refer to the Documentation CD.
Specification Value
Type FBDIMM,
PC2-5300F, Fully-Buffered DIMMs
Size
512-MB, 1-GB, 2-GB, 4-GB, 8-GB
Width 72
bits
Upgrade requirement *
FBDIMMs must be installed in pairs within a bank. A bank
must be populated with two FBDIMMs with identical HP
part numbers.
must be populated with two FBDIMMs with identical HP
part numbers.
*Use only Registered DDR2 FBDIMMs. Use HP FBDIMMs only.
1.44-MB diskette drive specifications
Specification Value
Dimensions
Height
12.7 mm (0.5 in)
Width
96 mm (3.8 in)
Depth
130 mm (5.1 in)
LEDs (front panel)
Green = Active
Read/write capacity per
diskette
diskette
High density
1.44 MB
Low density
720 KB