HP pe4240n ユーザーズマニュアル

Using the TV    

 

 The Channel options are 1, 2, 3, or 4. A broadcast may contain other closed caption data on 

channels 2–4; for most uses, set the channel to 1. 

8 Highlight and select Display so it turns red. Adjust the setting so it reads either Shadow or Box, and 

then press Setting front panel button (Enter on the remote control). 

9 Exit the menu. 

 

Use this procedure to select the VGA source signal type (Normal is 640 x 480, Wide is 852 x 480). 

1 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for 

steps to open and use the menus using the front panel buttons (or the remote control buttons). 

2 Select and display Configuration menu. 

 

 

 

3 Highlight and select VGA Source so it turns red. Adjust the setting so it reads either WIDE or 

NORMAL, and then press Setting front panel button (Enter on the remote control). 

4 Exit the menu. 

 

Select the color system for the Video input as Automatic, NTSC, or PAL input using this procedure. 

1 Display the OSD menus. Refer to “Using the On Screen Display (OSD) Controls” on page 28 for 

steps to open and use the menus using the front panel buttons (or the remote control buttons). 

2 Select and display Configuration menu. 

 

 

 

3 Highlight and select Color System so it turns red. Adjust the setting so it reads Auto, NTSC, or PAL, 

and then press Setting front panel button (Enter on the remote control).