ICOM ic-91a ユーザーズマニュアル

64

8

■ General description

The IC-91A/91AD has 850 memory channels in A band, 450
memory channels in B band, and 2 call channels in each
band. Memory channels in each bands including 50 scan
edge memory channels 

(25 pairs)

for storage of often-used

frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in each
bands for storing groups of frequencies, etc. Up to 100 chan-
nels can be assigned into a bank.

D

D Memory channel contents

The following information can be programmed into memory
channels:

• Operating frequency 

(p. 18)

• Operating mode 

(p. 21)

• Duplex direction 

(+DUP or –DUP)

with an offset frequency

(p. 31)

• Subaudible tone encoder 

(p. 107)

, tone squelch or DTCS

squelch ON/OFF 

(p. 110)

• Subaudible tone frequency 

(p. 107)

, tone squelch fre-

quency or DTCS code with polarity 

(pgs. 107, 111)

• Scan skip information 

(p. 80)

• Memory bank 

(p. 67)

• Memory name 

(p. 70)

• Tuning step 

(p. 18)

• Call sign squelch or Digital code squelch* 

(p. 110)

• Station call sign* 

(p. 36)

• RPT1/RPT2 call sign* 

(p. 41)

*Available for B band operation only.

■ Selecting a memory channel

D

D Using [DIAL]— Programmed channels

q Push [MR] to select memory mode.
w Rotate [DIAL] to select the desired memory channel.

• Only programmed channels are displayed.

D

D Using [DIAL]— All channels

q Push [MR] to select memory mode.
w Push and hold [S.MW](MR) for 1 sec. to enter select mem-

ory write mode.

• 1 short and 1 long beep sound.
• “

µµ ” indicator blinks.

e Rotate [DIAL] to select the desired memory channel.

• All channels are displayed.
• Push [VFO] to return to memory mode indication.

[DIAL]

A

µ

FM

FM

000

000

Appears

Rotate [DIAL] to select 
the memory channel.