HP proliant dl580 ユーザーズマニュアル

Removal and replacement procedures  14 

•

Flathead screwdriver 

•

Diagnostics Utility 

 

Safety considerations 

Before performing service procedures, review all the safety information. 

 

Preventing electrostatic discharge 

To prevent damaging the system, be aware of the precautions you need to follow when setting up the 
system or handling parts. A discharge of static electricity from a finger or other conductor may damage 
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the 
device. 

To prevent electrostatic damage: 

•

Avoid hand contact by transporting and storing products in static-safe containers. 

•

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. 

•

Place parts on a grounded surface before removing them from their containers. 

•

Avoid touching pins, leads, or circuitry. 

•

Always be properly grounded when touching a static-sensitive component or assembly. 

 

Server warnings and cautions 

Before installing a server, be sure that you understand the following warnings and cautions. 

  WARNING:  To reduce the risk of electric shock or damage to the equipment: 

•

  Do not disable the power cord grounding plug. The grounding plug is an important 

•

  Plug the power cord into a grounded (earthed) electrical outlet that is easily 

•

  Unplug the power cord from the power supply to disconnect power to the equipment. 

•

  Do not route the power cord where it can be walked on or pinched by items placed 

against it. Pay particular attention to the plug, electrical outlet, and the point where 
the cord extends from the server. 

 

  WARNING:  To reduce the risk of personal injury from hot surfaces, allow the drives and 

the internal system components to cool before touching them. 

 

  CAUTION:  Do not operate the server for long periods with the access panel open or removed. Operating 

the server in this manner results in improper airflow and improper cooling that can lead to thermal damage. 

 

Preparation procedures 

To access some components and perform certain service procedures, perform one or more of the 
following procedures: 

•

Extend the server from the rack ("

If you are performing service procedures in an HP, Compaq branded, telco, or third-party rack 
cabinet, you can use the locking feature of the rack rails to support the server and gain access to 
internal components. 
For more information about telco rack solutions, refer to the RackSolutions.com website 
(