HP proliant dl580 ユーザーズマニュアル

Removal and replacement procedures  40 

Open the latch, and lift the memory backplane from the server. 

 

To replace the component, reverse the removal procedure. 

 

Removing a hard drive blank 

  CAUTION:  To prevent improper cooling and thermal damage, do not operate the server unless all bays 

are populated with either a component or a blank.  

Remove the hard drive blank by squeezing the release buttons, and pulling the blank from the server. 

 

To replace the component, reverse the removal procedure. 

 

Removing a hot-plug SCSI hard drive 

  CAUTION:  Always power down the server if the boot partition resides on the drive you are replacing or if 

you are replacing the only drive in the server.