HP proliant dl580 ユーザーズマニュアル

Removal and replacement procedures  59 

  CAUTION:  Only memory boards with a green Removable LED can be removed. Do not attempt to remove 

any memory board with the Removable LED off. 

  CAUTION:  To prevent system failure, do not remove the memory board from the server until the board 

status LED stops flashing. 

Unlock the locking switch, and open the release latch. 

Use the ejector lever to pull the memory board out of the server. 

 

  NOTE:  While the memory board with the failed or degraded DIMM is being replaced, the server continues 

to read and write from the operational memory board. 

 

Removing DIMMs 

Remove the memory board using the appropriate hot-replace or non-hot-plug procedure ("

Remove the DIMM. 

 

To replace the component, reverse the removal procedure.