HP proliant dl580 ユーザーズマニュアル
Server cabling 93
For ease of cabling, route the cables in the server before connecting the cables to the SAS hard drive
cage.
cage.
NOTE: Port 1 supports hard drives 1 through 4. Port 2 supports hard drives 5 through 8. If you are using a
single channel SAS controller, connect the cable to port 1.
USB cable assembly
The USB cable connects the front panel USB connector to the SCSI backplane.
To remove the component:
1.
Power down the server (on page
2.
Extend the server from the rack ("
3.
Remove the access panel ("
4.
Remove the front bezel ("
5.
Disconnect all cables from the media board.
6.
Remove the media board ("