HP proliant dl380 g7 633407-001 ユーザーズマニュアル

Component identification 101

1 Green LED

2 Amber LED

Interpretation

Off

The flash code is corrupt.

Hot-plug fans

CAUTION:

To avoid damage to server components, fan blanks must be installed in fan bays 5

and 6 in a single-processor configuration.

The only two valid fan configurations are listed in the following table.

Configuration

Fan bay 1 Fan bay 2 Fan bay 3 Fan bay 4 Fan bay 5 Fan bay 6

1 processor

Fan

Fan blank

2 processors

Fan

For a single-processor configuration, four fans and two blanks are required in specific fan bays for

redundancy. A fan failure or missing fan causes all fans to spin at high speed. A second fan failure or missing

fan causes an orderly shutdown of the server.
Installing more than the required number of fans in a single-processor configuration is not a supported

configuration.
For a dual-processor configuration, six fans are required for redundancy. A fan failure or missing fan causes

all fans to spin at high speed. A second fan failure or missing fan causes an orderly shutdown of the server.
The server supports variable fan speeds. The fans operate at minimum speed until a temperature change

requires a fan speed increase to cool the server. The server shuts down during the following

temperature-related scenarios:

•

At POST and in the OS, iLO 3 performs an orderly shutdown if a cautionary temperature level is
detected. If the server hardware detects a critical temperature level before an orderly shutdown occurs,

the server performs an immediate shutdown.

•

When the Thermal Shutdown feature is disabled in RBSU, iLO 3 does not perform an orderly shutdown

when a cautionary temperature level is detected. Disabling this feature does not disable the server
hardware from performing an immediate shutdown when a critical temperature level is detected.